Insitei2

Use Both Insitei2 and Vigil Geo to monitor your Marine Craft, large and small!

Consider a typical marine setup.

The Security Alarm system is connected to send a message like "Warning: Security intrusion"

The Engine & Service batteries are connected to the Telemetry inputs. When a qualified user sends Insite a message: "T1E" the response is something like: "Service Battery = 13.4 Volts".

Bilge water level, smoke alarms, P.I.R. sensor and bilge pump operation are monitored. Each of these functions can be disabled remotely & individually by a user.

One of the remote wireless sensors is used to send an alarm when the yacht is moved from its dock. The owner can send Insite the following message to find out where it is, its direction and speed: " GPS" The response from Insite usually, within a minute, may be something like: "Insite GPS Lat 26.24.1, Long 115.32.45, speed 24 Kn, Co 270 T, Altitude 6ft" These co-ordinates can be directly plotted onto Google-Map.

If the owner determines the vessel has been stolen, he may contact the authorities and at the appropriate moment, he can send Insite another message: " F1E" ..and the ignition to the yacht is disabled, leaving the thieves afloat and immobilized.

It will also advise whenever shore power is lost and when restored.